Endura AZ40
Oxygen and carbon monoxide equivalent (COe) analyzerNew product release

The Endura AZ40 has been designed to assist combustion plant operators in their drive to reduce operational costs by driving down fuel usage, reducing the frequency of unplanned outages and extending periods between routine maintenance shutdowns.

By accurately and reliably monitoring the combustion exhaust gas for oxygen and combustibles, the operator can ensure a clean and efficient combustion that not only increases operational profitability but also reduces environmental impact through reduced emissions of polluting gasses.

Endura AZ30

The Endura AZ30 is an explosion-proof / flameproof combustion gas analyzer system designed for use in Hazardous Areas. The sensor, based on a zirconium oxide cell, is mounted at the tip of the probe that is inserted in the flue duct. The resulting direct, in situ measurement provides accurate and rapid oxygen reading for combustion control optimization and emissions monitoring.

Endura Combustion Gas Oxygen Analyzer AZ20

The Endura Combustion Gas Oxygen Analyzer AZ20 is the latest in a long line of high-quality, combustion gas analyzers from ABB. The sensor, based on a zirconium oxide cell, is mounted at the tip of the probe that is inserted in the flue duct. The resulting direct, in situ measurement provides accurate and rapid oxygen reading for combustion control optimization and emissions monitoring.

High temperature combustion gas oxygen analyzer
Endura AZ25

The Endura AZ25 is an in situ combustion gas oxygen analyzer system designed for use in high temperature applications > 600 degrees C.

The sensor, based on a zirconium oxide cell, is mounted at the tip of the probe that is inserted into the furnace or flue duct. The resulting direct, in situ measurement provides accurate and rapid oxygen reading for combustion optimization, process control and furnace atmosphere monitoring.

Oxygen & Combustibles Analyzer SMA90

The Oxygen & Combustibles Analyzer SMA90 is a microprocessor based industrial grade combustion analyzer that continuously samples and analyzes industrial flue gases (oxygen only or optional oxygen and combustibles).The analyzer is designed for use on gas, oil or coal fired combustion processes and has a high temperature operating range.Typical applications include those found in the utility and petrochemical industries.

Zirconia Oxygen Analyzer AZ100

The Zirconia Oxygen Analyzer AZ100 is designed primarily for small gas- and oil-fired boilers in industry, power, hospitals and ships. It is also used for inert gas generators and oxygen enrichment applications. The AZ100 is a complete system comprising a zirconia oxygen probe and a wall- or panel-mount instrument.

Zirconia Oxygen Probe ZGP2

The Zirconia Oxygen Probe ZGP2 is designed to measure oxygen in oxidizing, and some reducing, furnace atmospheres. When used in conjunction with an appropriate electronics unit, the probe output voltage may be converted to a signal related either to oxygen concentration or oxidizing potential terms i.e. % O2, ppm O2, kilocalories or millivolts.