|
The all new Sensaphone IMS-1000 Infrastructure Monitoring System makes it easy to monitor your critical facilities. It can monitor a wide variety of conditions and provides a web page view of your environment.
Plug in Sensors Web interface E-mail messages Text messages Optional voice phone call alarms Built in data logger Relay output No monthly fees No dependencies Video camera integration IP alarms Battery Backup
Easy Set Up:
All of the sensors for the Sensaphone IMS-1000 use standard computer patch cables (Cat-5). Just snap in the connector and you're done. The sensors are automatically detected by the 1000 and even self configured. There are no screw terminals to deal with and no wire stripping to worry about. Just plug and go.
Easy Programming:
A simple fill in the blank web page is provided for all of your detailed programming of the 1000. It only takes a few minutes to type in the monitoring parameters and contact methods.
Easy Status View:
The single click web summary provides a quick summary of all your monitored conditions. Go to the web page and check the summary as often as you like to verify that everything is okay.
Easy History and Trend Information:
The Sensaphone IMS-1000 system stores important information for later viewing. This includes the details of alarm events and even periodic snapshots of all of the monitored conditions. This information can be viewed at anytime from the automatically generated web page. You can view single-click quick trends for each monitored condition, or even create a custom history view to see exactly what has been going on at your facility.
CONDITIONS
- Power Failure
- Temperature - even ultra low freezers down to –85 Deg C
- Water on Floor
- Smoke, fire
- Humidity
- Security – doors, motions
- AC current
- Air Flow
- Third party bridge to dry contacts and 4-20mA transducers
SPECIFICATIONS
Physical
Shipping Weight 8 lbs.
Dimensions 14"w x 1.75"h x 7"d
Telephone Connection (IMS-1002 Only) FCC approved RJ-11 plug-in modular connector with 6' cord
Operating Temperature Range Unit should be kept between 32° F and 122°F
Status LEDS System ON, Battery OK, Output ON, Alarm
USB Ports (1) For Future Expansion (not yet available)
Mounting
1 EIA rack-mount 1 EIA rack-mount Rack Requirements: Standard 19" equipment rack with supplied mounting bracket hardware. Requires 1.0 EIA rack mount space.
Tabletop Tabletop requirements: Flat area which can support an enclosure 14" wide by 7" deep by 2"high.
IMS-1000 Operating Specifications
Temperature 32–122°F
Humidity 5-90% RH non-condensing
Power Supply 115VAC 60HZ 9VDC / 1 Amp
Power Consumption 10 Watts
Power Connection 2.1mm x 10mm jack
Backup Battery 6V 3.4AH sealed lead acid
Backup Time 3.5 Hours
Battery Service Life Under normal operating conditions, three to four years of dependable service life can be expected or between 200 and 1000 charge/discharge cycles, depending on the average depth of discharge.
IMS-1000 Communications Specifications
Ethernet 10/100 Base-T, 10/100Mbps
Protocols DHCP, TCP/IP, SNMP, HTTP, SMTP, POP, FTP
Modem (IMS-1002 Only) Voice / Modem 33.6Kbps, Fax Group 3, 14.4Kbps
Voice Processor (IMS-1002 Only) Yes
Recordable Voice (IMS-1002 Only) Yes, up to 30 custom messages
IMS-1000 Environmental Monitoring
Internal Monitoring AC Power (True RMS Voltage),
Backup Battery Level
IP Device Monitoring up to 16 IP/Port Services
Number of Sensor Ports 8
Sensor Types Temperature, Humidity, Water, Power, Current, Infrared Motion, Smoke, Dry Contact, 4-20mA
Temperature Sensing Range -109º F to 150º F with remote temperature sensor, NRTL listed for compliance with U.L. Standard 60950-1
Sensor Input Connector RJ-45
Sensor Cables CAT-5, 568B
Cable Length 1000'
Visual Indicators LEDs, Normal and Alarm
Output Relays
Number Of Outputs 1
Output Type SPDT (Form C) Latching, 1A 30VAC or 1A 24VDC
Output Mode Manual, Automatic on alarm
Warranty 3-year Limited Warranty
|
