CELL682 Wireless Alarms The ultimate choice for remote monitoring and control where telephone lines are non–existent or too expensive.

The latest addition to the Sensaphone wireless series of remote monitoring solutions is the Cell682. It can be placed at a remote, unmanned facility to detect a variety of potential equipment problems, and can even perform some output control. It uses standard cellular technology to communicate with the Sensaphone servers. If a telephone line is not already in place, the cellular communications in the Sensaphone Cell682 can provide a convenient, reliable, and cost effective method to monitor a remote facility. The Sensaphone Cell682 provides an assortment of sensor input options to handle many different types of sensors and conditions to monitor. Two relay outputs are also included in the Cell682 for local control.

A full alarm history is available on the CELL682 website

6 Analog Inputs:

Can accept any 4-20mA analog transducer.
Input range can be custom scaled to measure in real engineering units.
Thermistors can be connected directly to accurately measure temperature.

8 Dry Contact Inputs:

Each channel can be normally open or normally closed.
Any input can be configured to accumulate run time.

2 Relay Outputs:

Manually controlled through website.
Automatically switched when an alarm occurs.
Built in duplex pump control logic.
Alarms can automatically initiate an output response to a different location.

Alarm Notification

When an input channel detects an alarm, or out of range condition, there is an immediate communication from the Cell682 out to the redundant Sensaphone servers to process the alarm. The appropriate people are then contacted immediately by the Sensaphone servers using the following methods:

E-mail messages
Cell phone and pager text messages
Custom voice phone calls

SENSAPHONE CELL682 SPECIFICATIONS

Communications: GSM Cellelar Wireless Technology, 90+% Wireless Coverage

Inputs: 6 - Analog 4-20mA Inputs, 8 - Contact Closure Inputs, 2 - Relay Outputs, Run Time Accumulation, Temperature Measurement

Alarm Delivery: E-Mail – SMTP, E–mail Alarm Notification, Text Message Alarm Notification, Voice Phone Call Alarm Notification, 24 - Alarm Notification Destinations

Other Details: E-Mail – SMTP, Website Programming Access, 12VDC Power Requirement, Duplex Pump Control Logic, Peer to Peer Control Logic, NEMA4X Enclosure Rating, -30°C to 60°C (-22°F to 140°F) Operating Conditions